Inclusive of all taxes
CP-FUT-6TSRH-305 is a 305m UTP cable made of a solid annealed bare copper conductor, which offers high conductivity. The cable has a PVC insulation material with black colour. The cable also has a PVC outer jacket that offers protection from external damage and moisture resistance. The cable has a UL-type CM fire rating, flame retardant and halogen-free insulation material LLDPE.
7 days return
7 days exchange
EMI Available
Share your thoughts with other customers
Write your reviewI recently purchased the CP PLUS 305m CAT6 4Pair UTP Cable (Eco Series) CP-FUT-6TSRH-305 from askmesolution.in, and I must say, the experience was excellent! The product quality is top-notch, perfect for high-speed networking needs. The owner was incredibly helpful and responsive, making the ordering process smooth and hassle-free. Delivery was prompt and well-handled, ensuring the product arrived in perfect condition. I highly recommend askmesolution.in for their exceptional service and quality products. If you're looking for reliable networking cables, this is the place to go. A 5-star experience all around!
The cable has a standard length that allows easy installation at homes, offices and other commercial establishments. It can be used for video, power and audio communication applications in residential, commercial and industrial buildings.
CP-FUT-6TSRH-305 UTP cable is designed to transmit complete video frequency with minimum distortion or attenuation for security and surveillance. UTP cables are designed to optimize the quality of video signals. The cable is generally used in high-speed data transmission and can be used in many applications.
The UTP cable has been designed to meet the requirements of both Voice and Video applications, which are often combined in one system. This means that your UTP cable will work with most devices that use either type of cable. The base for this cable is made from PVC insulation, and a ground wire runs through it, protecting against EMI/RFI interference from outside sources. Both sides are covered by a PVC jacket which helps protect them from damage caused by heat or moisture during installation or use.
Insulation | HDPE |
Nominal Conductor Diameter | 1/0.50±0.008mm (24AWG) |
Cross Filler | The Cross |
Approximate OD | 0.92±0.05mm |
Impedance | HDPE-DC 500V 50MΩ.KM. PVC-DC 500V 5MΩ.KM MIN at 20°C |
Resistance Unbalance | 24AWG-250Ω/Km Max at 20°C |
Colour of Sheath | Gray |
Sequential Marking | Every Meter |
Packing | 305 Mtrs |